Final Test - Alcatel ONETOUCH POP 3 Series Repair Documentation

L2 Repair Document
Please follow the detail steps 5.3 (Disassembly process).
But need to be very careful to handle the components with related special tool or jig (especially replacing
new components)
It is better to handle it with plastic tools (plastic tweezers and wedge etc.).
Besides operator must wear anti-static gloves, fingertips or wear static loop during the whole process of
components exchange.

10 Final test

Function Test
During the function test, the following items must be checked and validated.
1) Cosmetic aspect of the handset,
2) The Software Technical sticker state on the Board
3) Switch on the handset
4) Default welcome message
5) Press *#2886# on the idle screen to start the auto test
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Communication Ltd.
Page
37/42