Measurement; Appendix 1 Packaging Requirements - Alcatel ONE TOUCH 7053 Repair Document

L2 Repair Document

9.2 Measurement

APPENDIX 1 Packaging Requirements

1、
Appearance Requirements of PCBA
ⅰ、The failure code label, commercial label, custom label and network code should be stuck onto
PCBA
ⅱ 、 The repair PCBA and custom label should be matched (see appendix one for the detailed
information)
PCBA of Flip Phone
Network
code
Commercial
label
put commercial label and network code on
Rev.
1.1
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
one side
ALCATEL ONE TOUCH 7053 Level 2 Repair Document
TCT
Put failure code label and custom label on
other side
Mobile Limited
Custom
label
Failure
code label
Network
Page
code
41/44