Disassembly Process Evaluation - Alcatel ONETOUCH POP 3 Series Repair Documentation

L2 Repair Document

When assembling furnished frame, make sure the main camera, TP FPC, LCD FPC, vibrator and
speaker are well installed firstly.
 Before assembling battery cover, please check whether there‟s any deformation or damage for the
buckles; if yes, replace it with a new battery cover.

5.5 Disassembly process evaluation

We list the Pixi3-5 3G parts disassembly time, technique levels and disassembly methods as below, for
technique levels, Class 1 signifies easy to disassembly, Class 2 signifies normal to disassembly and Class
3 signifies hard to disassembly.
Spare part
battery cover
battery
Screws
Furnished Frame
Main PCBA
Front Camera
Main Camera
P Sensor Rubber
Main MIC Rubber
Receiver bracker
Receiver
Speaker
Vibrator
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Time for Jigs for
disassembly disassembly
2s
2s
10s Screw driver
5s Plastic flake
Tweezers
12s
Plastic flake
3s Tweezers
3s Tweezers
2s Tweezers
2s Tweezers
2s Tweezers
3s Tweezers
Tweezers
3s
Soldering iron
3s Tweezers
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Difficulty
Class
- Class 1
- Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Class 2
Class 1
Communication Ltd.
Remark
Page
31/42