Disassembly Process - Alcatel ONETOUCH POP 3 Series Repair Documentation

L2 Repair Document

5.3 Disassembly process

The steps of disassembly 5015 are as below.
This module should only be disassembled from bottom to top.
Step 1: Remove battery cover and battery, and then take off 11 screws with screwdriver. There are 2
kinds of screws as below.
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Communication Ltd.
Page
21/42