L2 Repair Document
Plastic Flake
Screwdriver
suction cups
5.3 Disassembly process
The steps of disassembly ONE TOUCH 6030D/X/A are as below.
Step 1: open TF card cover and take off the screw beside TF card slot with screw driver.
Be careful not to scratch furnished back casing.
Rev.
1.2
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
By NCK Team
Tweezers
Soldering iron
ONE TOUCH 6030D/X/A/N Level 2 Repair Document
TCT
Mobile Limited
Hot wind gun
Camera Jig
Page
25/66