Table of Contents
Advertisement
6.2
Software update
Software for SLite tiles
Software is stored on four different locations in the SLite tile:
1.
On the FPGA of the re-sync unit : firmware re-sync unit (A).
2.
On the FPGA of the controller unit : firmware front (B).
3.
On the second FPGA on the controller unit : firmware back (C).
4.
On the CPU of the controller unit : program and boot software (µP).
Re-sync unit
Data path
(firmware resyncer)
Serial comm.
Image 6-3
Flash software like firmware re-sync unit, firmware front, firmware back and program code can be updated in the field if required.
CPU boot software can not be upgraded (only factory programmable). New releases of flash software are available on the "Partner
Zone" of the Barco web site www.barco.com. Refer to the user guide of the Director toolset for instructions on reading out the version
of flash software and for uploading new versions.
R5976575 FIXED SLITE DISPLAY 08/03/2006
LED controller unit
FPGA
A
(firmware front)
CPU
µP
(program)
FPGA
FPGA
B
C
(firmware back)
6. Maintenance
LED drivers
LED boards
33
Advertisement
Table of Contents
