Table of Contents
Advertisement
Equipment Type
40 — Indoor Unit
Product Type
WA — Single-Phase VRF
Model Type
W — High Wall Mount
VRF — Variable Refrigerant Flow
C
40WAW UNIT SIZE
007-012
015,018
NOTE: All dimensions shown in inches.
INSTALLATION
Step 1 — Unpack and Inspect Units —
packaged for shipment to avoid damage during normal transit
and handling. It is the receiving party's responsibility to inspect
the equipment upon arrival. Any obvious damage to the carton
and/or its contents should be reported on the bill of lading and a
claim should be filed with the transportation company and the
factory. Unit should always be stored in a dry place, and in the
proper orientation as marked on the carton.
40
LEGEND
Fig. 1 — Model Number Nomenclature
DIMENSION
A
B
C
36
11
1
/
9
2
42
1
/
12
1
/
9
4
2
Fig. 2 — 40WAW007-018 Dimensions
Units are
WA W 007 ---
3
Voltage (V-Ph-Hz)
3 — 208/230-1-60
Blank
Capacity (Btuh)
007 — 7,500
009 — 9,500
012 — 12,000
015 — 15,000
A40-1918
018 — 19,000
D
A
D
28
1
/
4
35
1
/
8
To avoid equipment damage, do not lift unit by the drain
pipe or refrigerant piping. Unit should be lifted using the
mounting brackets.
After determining the condition of the carton exterior, care-
fully remove each unit from the carton and inspect for hidden
damage. Check to make sure that items such as thermostats,
controller etc. are accounted for whether packaged separately
or shipped at a later date. Any hidden damage should be re-
corded, a claim should be filed with the transportation compa-
ny, and the factory should be notified. In the event a claim for
3
B
a40-1733
CAUTION
Advertisement
Table of Contents
