Table of Contents
Advertisement
5
Press F10 (SAVE).
This writes the adjustment values to non-volatile memory on the input
board. The settings are now maintained by the BKDS-7111 board even
when the power is turned off and on.
6
Repeat steps 3 to 5 to make the adjustments for all inputs.
About the parameter indications in the DIAGNOSIS menu screen, see page
14-5.
Note
Unlike the settings in the SETUP menu, the DIAGNOSIS menu settings
cannot be saved to floppy disk.
Checking the Board Configuration
Checking the configuration of the boards installed in the switcher
In the DIAGNOSIS menu, select item 1 (SWER PROC), then press F3
(BOARD CONFIG).
The board configuration appears in the menu display.
Chapter 14 DIAGNOSIS Menu Operations
14-7
Advertisement
Table of Contents
