Table of Contents
Advertisement
DME Wipes
Applying DME wipe modifiers
There are three modifiers you can apply to a DME wipe: the direction,
position and edge modifiers.
Note that only the direction setting has effect on a user programmable DME
effect.
Additionally, the position modifications can only be applied to the pattern
Selecting the wipe direction
Positioning the pattern
To apply these modifiers, use the following procedure.
1
2
4-90
Chapter 4 Basic Operations for Image Creation
in the squeeze group.
Depending on the bank on which you are carrying out the transition, in
the M/E-1 DME WIPE menu, select item 2 (DIRECT/POS).
The DIRECT/POS menu appears.
DIRECTION
NORMAL
NORMAL
REVERSE
REVERSE
F1
F2
F3
Function key indications in the DIRECT/POS menu
To specify the wipe direction, press one of F1 through F3, turning it on.
F1 (NORMAL): Carry out the wipe in the forward direction.
F2 (NORMAL/REVERSE): Carry out alternate wipes in opposite
directions.
F3 (REVERSE): Carry out the wipe in the reverse direction.
Note
For a key transition, the forward and reverse executions may not be the
same as for a background transition. The direction setting has no effect
on a user programmable DME effect.
POS
OFF
F4
F5
F6
F7
F8
F9
F10
Advertisement
Table of Contents
