Table of Contents
Advertisement
4
Adjust the parameters to move the selected image to the desired position.
Knob
1
2
5
If you selected F2 (LIVE) in step 2, press F7 (INPUT MASK) to select
whether or not to mask the input video.
OFF: Move the whole input video frame.
ON: Move only the portion of the input video frame defined by a
For details, see steps 6 to 9 in the section "Creating a new video
image and writing it to frame memory" (page 6-7).
To return to the moved frame to the center position
Press F5 (POS CENTER).
Linking Frame Memories – LINK
It is possible to link frame memory 2 to frame memory 1.
Linking two frame memories
Use the following procedure.
1
In the FRAME MEMORY 1 menu, select item 4 (LINK).
The LINK menu appears.
MEMORY
LINK
ON
F1
Parameter
H Move
V Move
rectangular frame (BOX) or wipe pattern. If you choose this
selection, continue to select the mask source type and parameters.
PATTERN
LINK
OFF
F2
F3
F4
Function key indications in the LINK menu
Setting
Amount of horizontal movement (–50.00 to
+50.00)
Amount of vertical movement (–50.00 to +50.00)
F5
F6
F7
Chapter 6 Frame Memory
F8
F9
F10
(Continued)
6-15
Advertisement
Table of Contents
