Setup Relating To The Overall Switcher System (System Menu) - Sony DVS-7250 User Manual

Setup Relating to the Overall Switcher
System (SYSTEM Menu)
To carry out setup operations relating to the overall switcher system, access
the SYSTEM menu.
Accessing the SYSTEM menu
In the SETUP menu, select item 1 (SYSTEM).
The SYSTEM menu appears.
Selecting the next menu
When you have displayed the SYSTEM menu, access the next menu
according to the data item you wish to set.
The menus you can access from the SYSTEM menu are listed in the
following table, together with their functions, and the function keys you need
to press to access them.
Menu
INSTALL
SYSTEM
SETUP
SYSTEM
CONFIGURA-
TION
13-4
Chapter 13 Setup
SYSTEM SYSTEM
SETUP CONFIG
F1 F2 F3 F4
Function key indications in the SYSTEM menu
Menus accessed from the SYSTEM menu
Functions
Installing software
• Setting the date
• Setting the time
• Selecting the signal format
• Toggling the 7.5 IRE setup on or
off (D2-525 systems only)
• Setting the screen aspect ratio
• Selecting the video switching
timing
• Selecting the state at power on
• Setting the buzzer
• Setting the input signal range
• Specifying the final M/E bank to
be controlled from the remote
panel
• Setting the phase relation
between the external sync signal
input to the switcher and the
output signals of the switcher
• Setting multiple cross-point
assignments
INITI- INFOR-
ALIZE MATION
BACKUP
F5 F6 F7
Function key
F10 (INSTALL)
F3 (SYSTEM
SETUP)
F4(SYSTEM
CONFIG)
INSTALL
F8 F9 F10
See page
13-5
13-6
13-8
(Continued)