Program/Preset Bank
Signal Selection Section
3 Source name display
PGM
PST
BKDS-7025
PGM
PST
BKDS-7026
1 Cross-point buttons
These buttons select the signals used for
video making on the PGM/PST bank.
The PGM (program) and PST (preset)
rows of buttons correspond to the A and B
buses of the M/E banks. Each row also
has two reentry buttons (M/E-1 and M/E-
2) to select the output from any of the M/E
banks.
2-18
Chapter 2 Location and Function of Parts
1 Cross-point buttons
1 Cross-point buttons
Signal selection section
DSK1(DSK1 bus) row, DSK2(DSK2
bus) row (BKDS-7026)
DSK(DSK bus) row (BKDS-7025)
These buttons select the key signals to be
inserted into the video in the downstream
keyers.
• BKDS-7026
The DSK1 and DSK2 rows correspond to
the DSK1 and DSK2 fill buses,
respectively.
SHIFT
M/E
M/E
1
2
M/E
M/E
1
2
2 Bus tally indicators
M/E
M/E
1
2
M/E
M/E
1
2
2 Bus tally indicators