Siemens SIMATIC PCS 7 System Manual page 70

Material management
5.6 Material lots
Adding attributes
To add an attribute, follow these steps:
1. Select the "Material lots" group in the navigation area of the APF engineering tool.
All defined attributes are displayed in the working area.
2. Specify the number of the function block that is generated for the material lot management.
Note
Block numbers FB1775-1795 are reserved for APF blocks and must not be overwritten.
3. Click on the last row in the working area and specify the following properties:
4. Click the "Save" button.
70
Column
Pos
Name
UoM
Format
Enum_Mat
Low limit
High limit
TXTLIB
FCT_IO_BLOCK_NAME
Visible
Position in the visualization order
Name of the attribute
Unit of the attribute
Format of the attribute
Name/coding of an enumeration
The "ENUM_MAT" field can only be selected if you have set "ENU‐
MERATION" as the format of the attribute. You can create enumer‐
ations in SIMATIC Manager under "Global Declarations".
Lower operator control limit for numerical values
Upper operator control limit for numerical values
ID for multilingual management in the text library (non-editable; as‐
signed automatically)
Name of the output in the AS function block
You can use the "Visible" check box to specify whether the attribute
is displayed in the process picture.
Advanced Process Functions Engineering Manual
Explanation
System Manual, 07/2016, A5E38719921-AA