Siemens SIMATIC PCS 7 System Manual page 106

Parameter management
7.5 Parameter trigger
3. Configure the trigger using the following settings:
4. Click "OK".
5. The "Edit trigger" dialog closes.
6. Click the "Save" button in the working area of the APF engineering tool to apply the changes.
7. Click the "Dismiss" button in the working area of the APF engineering tool to discard the
changes.
106
Area/check box
Name
Cycle
Enabled
Cycle time
Explanation
Name of the trigger (non-editable)
Intervals for executing the actions in runtime:
Standard cycle
Hourly
Daily
Weekly
Monthly
Annually
Activation of the trigger
Timing for executing the actions
(depending on the cycle setting)
Advanced Process Functions Engineering Manual
System Manual, 07/2016, A5E38719921-AA