5. Configure the inputs and outputs of the function block.
– For the "ID_1" input, enter the value of the local ID you specified for the configured S7
– Enter a unique value for the "R_ID_1" input, and keep track of it. You need this value
– At the "ID" input, specify a unique ID for the block. Recommendation: "ID" = "R_ID_1".
– Configure the other input and output parameters of the function block.
Note
You can find a detailed description of the input and output parameters in the block
description of "FB_UA_WM".
Advanced Process Functions Engineering Manual
System Manual, 07/2016, A5E38719921-AA
connection.
when configuring the OS tags in a later configuring step.
Configuring AS-OS communication
3.3 User Archive Write Manager
21