General Information On The Engineering Tool - Siemens SIMATIC PCS 7 System Manual

9.5

General information on the engineering tool

Following a structural change (for example, adding a new attribute), you should also promptly
regenerate and use the block after saving. Otherwise, problems may occur due to non-
matching data structures between block users archive and editor dialog.
Spaces either within or at the end of the IO name (connection name of the attribute at the
block) are not allowed.
Advanced Process Functions Engineering Manual
System Manual, 07/2016, A5E38719921-AA
Additional steps for configuring
9.5 General information on the engineering tool
129