Maintenance Of The Installation; Product Recycling; Ec Declaration Of Conformity - Studer Xtender XTH 5000-24 Installation And Operating Instructions Manual

STUDER Innotec Xtender

8 Maintenance of the installation

With the exception of the periodic checking of connections (tightening and general condition) the
Xtender does not require any special maintenance.

9 Product recycling

The models of the Xtender series conform to the European directive
2002/95/EC on hazardous substances and does not contain the following
elements: lead, cadmium, mercury, hexavalent chrome, PBB or PBDE.
To dispose of this product, please use the service for the collection of electrical
waste and observe all applicable obligations according to the place of purchase.

10 EC declaration of conformity

The inverter and accessories described in this manual comply with the following standards:
EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, Dir. 89/336/EEC,
LVD 73/23/EEC, EN 50091-2, EN 60950-1.
CH -1950 Sion, 31 January 2007
STUDER Innotec (R. Studer)
Installation and operating Instructions Xtender V1.3 Page 26