Maintenance - Terex Genie GS-1530 Operator's Manual

Seventh Edition • First Printing
Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Part No. T107027
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper levels is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
Note: Perform this procedure with the platform in
the stowed position.
1 Visually inspect the oil level in the hydraulic
tank.
Result: The hydraulic oil level should be as
marked on the tank.
2 Add oil if necessary. Do not overfill.
Hydraulic oil specifications
Hydraulic oil type
GS-1530/32 • GS-1930/32
Operator's Manual

Maintenance

Chevron Rando HD
equivalent
39