Work Area Safety - Terex Genie GS-1530 Operator's Manual

Operator's Manual

Work Area Safety

Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Maintain safe distances from electrical power lines
and apparatus in accordance with applicable
governmental regulations and the following chart.
Line Voltage
Clearance
0 to 50KV
50KV to 200KV
200KV to 350KV
350KV to 500KV
500KV to 750KV
750KV to 1000KV
Allow for platform movement, electrical line sway
or sag and beware of strong or gusty winds.
Keep away from the machine if it contacts
energized power lines. Personnel on the ground or
in the platform must not touch or operate the
machine until energized power lines are shut off.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
8
Tip-over Hazards
Occupants, equipment and materials must not
exceed the maximum platform capacity.
Maximum Capacity
GS-1530 and GS-1532
GS-1930 and GS-1932
Do not raise the platform unless the machine is on
a firm, level surface.
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds on the chassis only when the
machine is on a slope.
Required
3.05 m
4.60 m
6.10 m
7.62 m
If the tilt alarm sounds:
10.67 m
Lower the platform. Move the machine to a firm,
13.72 m
level surface. If the tilt alarm sounds when the
platform is raised, use extreme caution to lower the
platform.
Do not drive over 0.8 km/h with the platform raised.
GS-1530/32 • GS-1930/32
Seventh Edition • First Printing
Part No. T107207
272 kg
227 kg