Storing The Machine; Sharpening The Cutting Blades - Stihl FH Instruction Manual

Adjustable 135° Version
: Check the lubricant level at regular
intervals of about 25 hours of
operation.
: Unscrew the filler plug (2).
: If no grease can be seen on the
inside of the filler plug, screw the
tube of grease into the filler hole.
: Squeeze up to 5 g (1/5 oz) grease
into the gearbox.
Do not not completely fill the
gearbox with grease.
: Refit the filler plug and tighten it
down firmly.
FH

Storing the Machine

For periods of about 3 months or longer:
: Clean the cutting blades, check
condition and spray with STIHL
resin solvent
: Fitting cutter blade guard
: Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons
English / USA
Sharpening the Cutting
Blades
The blades must be resharpened if
cutting performance and behavior begin
to deteriorate (i.e. if blades frequently
snag on branches).
It is best to have the cutting blades
resharpened by your STIHL dealer on a
workshop sharpener.
Do not operate your unit with dull or
damaged blades – this may cause
overload and will give unsatisfactory
cutting results.
15