English
Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the spark plug
Screw in spark plug
N
Firmly press the spark plug
N
connector onto the spark plug.
Align the spark plug connector so
N
that the ignition cable points to the
upper left corner (arrow).
4
3
2
Place the cap (1) on the hood from
N
behind and at a slight angle,
pressing the nose (2) into the
opening (3) of the hood.
On the front, swivel the cap onto the
N
hood, screw in the screw (4) and
tighten.
30
Engine Running Behavior
If engine running behavior is still
unsatisfactory after servicing the air filter
and adjusting the throttle cable, the
cause may be the muffler.
Have the muffler checked by a servicing
dealer for contamination
(carbonization).
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Storing the Machine
If the machine is to remain out of use for
approx. 3 months or more
Drain and clean the fuel tank in a
N
well ventilated place
Dispose of fuel in accordance with
N
the regulations and having regard
for the environment
Run the engine until the carburetor
N
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
Remove, clean and inspect the
N
cutting attachment. Treat metal
cutting attachments with protective
oil.
Thoroughly clean the machine
N
Store the machine in a dry and safe
N
place, out of the reach of children
and other unauthorized users
FS 410 C-M K, FS 460 C-M K, FS 490 C-M K