Scanning Methods; Scanning Via Twain Interface - Plustek MobileOffice User Manual

3. Press the SCAN button on the scanner. The scanning starts immediately.
4. If you have the "Continuous Scan" option checked, follow the on-screen
instructions to insert another document or image until you have scanned all.
5. When the scan completes, the scanned images will be save to the defined file
path as separate image files and sent to the assigned post-processing software.

Scanning Methods

There are three different ways to operate the scanner:
1. By acquiring images from the scanner through our TWAIN interface within any
TWAIN-compliant application programs.
2. By scanning from the buttons on the scanner front panel
3. By scanning from DocAction's Execute menu on the screen.
The TWAIN interface and DocAction software is automatically installed to your
system along with the scanner driver.
Attention

Scanning via TWAIN Interface

The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use our bundled business card recognition
software (NewSoft Presto! BizCard) to scan via TWAIN interface. When you get
familiar with the scanning, you may alternatively use other TWAIN compatible scanning
program or image-editing application to do your scanning projects.
Before you start scanning, check the following:
1. The power of both your computer and scanner
is turned on.
2. The icon
system tray.
3. Paper is appropriately loaded into the scanner.
12
appears on the Windows