Step 3. Testing The Scanner - Plustek MobileOffice User Manual

6. Insert the special calibration sheet, included with the scanner, face up into the page
feed of the scanner.
7. Follow the on-screen instructions to complete the scanner calibration.
8. After the installation is complete, close all open applications and click on the
"Finish" button to restart your computer.
Attention

Step 3. Testing the Scanner

The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Insert the document or image face up into the scanner. Align the paper to the
arrow sign on the left of the scanner.
2. Do one of the following to open the Button Configuration window:
Double-click the DocAction icon
Right-click the DocAction icon
choose Button Configuration... in the pop-up menu that opens.
Save the Setup/Application DVD in case you
need to reinstall the driver and software in the
future.
Save the Calibration Sheet in case you need
to calibrate the scanner in the future.
in the Windows system tray.
in the Windows system tray, and then
8