Table of Contents
Advertisement
NE provisioning
3.
An "infinite" wait-to-restore time can be used in situations when enough timing
references are available, and you do not want to use a timing reference again that has
failed before.
...................................................................................................................................................................................................
5
Important! It is strongly recommended to switch from the free-running mode to
the locked mode as soon as valid timing references are available and assigned.
From the
mode.
You can select one of the following values:
•
Free Running
•
Locked
During normal operation in a network environment, the timing generator should be
locked to a timing reference signal as far as available. Normally the free-running mode
is used directly after the system start.
Result:
timing clock from locked to free running can temporarily result into transmission
errors."
...................................................................................................................................................................................................
From the
6
Assignment Profile (ASAP) of type "System Timing" to be assigned to the system
timing.
By clicking the
ASAPs of type "System Timing".
...................................................................................................................................................................................................
Apply the changes by clicking
7
clicking
Result:
...................................................................................................................................................................................................
8
Click
Close
...................................................................................................................................................................................................
In the WaveStar
9
then the
....................................................................................................................................................................................................................................
365-374-179R10.0
Issue 2, June 2009
Clock Mode
drop-down list box, select the timing generator operational
: The system is synchronized to the internal oscillator.
: The system is synchronized to a timing reference signal.
If you select
Free Running
System Timing ASAP
Detail
button, you can retrieve detailed information on the available
Yes
.
The "ABN" LED on the User Panel will no longer illuminate.
.
®
CIT
System View
System Timing
tab to verify that the new parameters were accepted.
Alcatel-Lucent - Proprietary
See notice on first page
a warning window appears. "Switching the
drop-down list box, select the Alarm Severity
, and confirm the resulting system message by
Apply
, select
View → Timing/Synchronization
Procedure 7-10: System timing
, and
7-41
Advertisement
Chapters
Table of Contents
