Britax ONE4LIFE CLICKTIGHT Series User Manual page 41

10. Route the lower
connector strap through
the FORWARD-facing
belt path marked by
green labels. Firmly
press the lower
connectors onto their
adjacent anchors until a
click is heard.
11. Ensure the connector
strap is not twisted and
remove slack.
12. Close the CLICKTIGHT
door over the lower
connector strap.
13. Ensure both CLICKTIGHT
release buttons are
visible.
NOTE: If it is difficult
to close, you may have
removed too much slack.
14. Connect the top tether
hook to the vehicle's top
tether anchor (check the
vehicle owner's manual
for location).
15. Pull the top tether strap
to remove slack and
secure excess webbing
with the elastic band
attached.
ADJUSTMENT
SLOT
39