Lower Anchor Connectors (Latch) - Britax ONE4LIFE CLICKTIGHT Series User Manual

REAR-Facing Installation with Lower Anchor
Connectors (LATCH)
Do NOT install by this method for a child weighing more
than 30 lb (13.6 kg).
1. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath the
front cover flap and lift to
open.
2. Open the storage
pocket. Remove the
lower connectors by
pushing the red buttons
and pulling away from
the child restraint.
3. Extend lower connector
strap to its longest
length by pressing grey
button on the lower
connector adjuster.
4. Place the child restraint
REAR-facing on vehicle
seat so that the bottom
of the base sits flat on
the vehicle seat.
5. Recline child restraint to
the appropriate position.
Refer to page 15 to
determine appropriate
recline position.
22