Display
Settings for display
1. EX9-OET1/EX9-OET2/EX9-OEP1/EX9-OEP2
Display
0
Lights on: Output ( OUT 0 ) is ON.
Lights off: Output ( OUT 0 ) is OFF.
1
Lights on: Output ( OUT 1 ) is ON.
Lights off: Output ( OUT 1 ) is OFF.
2. EX9-PE1
Display
PWR
Lights on: Power is supplied from external power
PWR
Lights off: Power is not supplied from external
38
Description
Description
supply.
power supply.
Option
Branch cable with M12 connector
For details, refer to subsection "Wiring" ( page 9 ) in section "EX500" in this manual.
How to order
EX500-AC 030 - SSPS
Cable length (L)
Connector specification
003
0.3 [m]
SSPS Socket side: Straight, Plug side: Straight
005
0.5 [m]
SAPA Socket side: Angle, Plug side: Angle
010
1 [m]
030
3 [m]
050
5 [m]
Power supply connector cable
For details, refer to subsection "Wiring" ( page 9 ) of section "EX500" in this manual.
How to order
EX500-AP 050 - S
Cable length (L)
Connector specification
010
1 [m]
S
Straight
050
5 [m]
A
Angle
Terminal Plug
Connected to C1 ( or 0 ) of SI unit when Input unit manifold is unused. ( If this terminal plug
is not used, COM LED of GW unit does not light on. )
How to order
EX500- AC000- S
8
2
1
3
7
4
6
5
Plug Connector Pin Layout
Waterproof cap
Mounted on unused ports of GW unit, input block, power block and output block.
The proper use of this waterproof cap can achieve IP65 Enclosure. ( The waterproof caps
are delivered together with each input block as accessories. )
How to order
EX500-AW
Connector specification
ES M8 connector ( socket ) /10 pcs.
TP M12 connector ( plug ) /1 pc.
TS M12 connector ( socket ) /10 pcs.
NOTE
Tighten the waterproof cap by the specified tightening torque. ( 0.05Nm for M8,
0.1Nm for M12 )
M12
44.7
39