Vcx Ip Telephones; Telephone Buttons And Controls - 3Com 3500 Manual

Message Waiting
2
Indicator(MWI)
3 Display Panel
4 Access buttons
5 Menu button
6 Navigation buttons
7 Voicemail button
8 Call Transfer button
9 Conference button
10 Redial button
11 Hold button
12 Number pad
Headset switch
13
button
14 Speaker button
soft buttons.
The MWI LED lights up when there are unread
messages in the voice mailbox, and blinks
when an incoming call is present.
The Display Panel displays the telephone state
and call information.
The 3503 telephone has eight Access buttons.
The button at the bottom is a page-switching
button, called the Shift button. The functions of
the other seven buttons are displayed on the
Display Panel. Each time you press the Shift
button, the Display Panel refreshes the
functions of the other seven buttons. The 3503
telephone supports three pages, which means
you can set up to 21 Access buttons. To
reprogram the function of an Access button,
log in to the VCX.
Press the Menu button to enter the
configuration menu of the telephone, or exit the
menu and return to the standby interface.
The navigation buttons include four direction
buttons and one select button. You can use the
navigation buttons to select menu items in the
configuration menu, or switch between lines
when multiple calls are present.
Press this button to directly access the voice
mailbox and listen to voice messages.
Use this button to forward calls. To forward the
current call to a third party, press the Call
Transfer button, dial the number of the third
party, and press the Call Transfer button
again.
Use this button to establish a multi-party
conference call. While on a call, press the
Conference button, dial the number of the
person you want to conference in, and then
press the Conference button again to start a
3-party conference. To conference more
people in, repeat this step.
Press this button to redial the last telephone
number or extension that you called.
While on a call, you can press the Hold button
to put the current call on hold. If the
administrator has configured the Music on Hold
(MOH) service, the person on hold will hear
music while he or she waits; if not, he or she
will not hear anything.
The number pad has twelve buttons: 0, 1, 2, 3,
4, 5, 6, 7, 8, 9, *, and #. Press the number
buttons to enter the number of the person you
want to call.
Press the headset switch button to switch
between the handset and a headset. The
backlight of the button is on when a headset is
used. If you choose the headset mode, you
need to speak through the headset after the
call is put through.
Press the Speaker button to use the
speakerphone mode. In this mode, you can
11