Programming Start And Stop Of The System With Timer - Daikin VAM 350GJVE Service Manual

Operation Procedure
3.2

Programming Start and Stop of the System with Timer

82
1
3
Remote controller for HRV BRC301B61
Remote controller for VRV BRC1C61
1
3
Remote controller for VRV BRC1A61,62
• The timer is operated in the following two ways.
Programming the stop time
elapsed.
Programming the start time "
• The start and the stop time can be simultaneously programmed.
Press the timer mode start/stop button "
1
• For setting the timer stop "
• For setting the timer start "
Each time the button is pushed, the indication changes as shown below.
"
2
1
3 2
2
fig 5
"". The system stops operating after the set time has
". The system starts operating after the set time has elapsed.
" several times and select the mode on the display.
"
"
"No indication"
" " "
Operation Manual
Si71-502