Remote Controller And Changeover Switch: Name And Function Of Each Switch And Display - Daikin VAM 350GJVE Service Manual

Si71-502
2.2 Remote Controller and Changeover Switch: Name and Function of Each
Switch and Display
25
Remote controller for VRV BRC1A61, 62
Remote controller for HRV BRC301B61
• Only the items marked with an asterisk (* mark) are explanation relating to the functions and display of
∗1 On/off button
∗2 Operation lamp (red)
∗3 Display "
4 Display "
5 Display "
6 Display "
Operation Manual
NOT
AVAILABLE
27
the unit. Unmarked items are functions of the combined air conditioners. When using buttons for
functions which are not available (buttons which are not described in the text) will cause "NOT
AVAILABLE" to be displayed.
Contact your dealer for more detailed descriptions of those functions (buttons).
Press the button and the system will start. Press the button again and the system will stop.
The lamp lights up during operation.
" (changeover under control)
May be displayed when combined with a VRV-system air conditioner.
While the indication is shown, the ON/OFF of HRVs cannot be operated by the HRV remote controller.
It is impossible to changeover heat/cool with the remote controller when this icon is displayed.
" (air flow flap)
This displays the direction and mode of the air flow flap of the combined air conditioner.
" (ventilation/air cleaning)
This display shows that the total heat exchange and the air cleaning unit are in operation. (These are
optional accessories.)
" (set temperature)
C
This displays the set temperature of the combined air conditioner.
It is not displayed when the unit is used as an independent system.
Remote controller for VRV BRC1C61
fig 3
What to do Before Operation
NOT
AVAILABLE
73