Table of Contents
Advertisement
WKP-1
Incoming Calls
Green Flashing LED Indicator -
The mic on or call LED indicator flashes to indicate an incoming call to the keypanel.
If tally is disabled, the LED indicator is only enabled for 45 seconds before it stops and returns to
•
normal operating mode.
If tally is enabled, the LED indicator is enabled as long as the push-to-talk button is not pressed.
•
When a call comes to the keypanel, the incoming call LED indicator is activated and flashes. At this point, if the PUSH-TO-
TALK button is pressed, it acts as a CWW (Call Waiting Window) reply key. The user can respond to the incoming call rather
than only being able to talk to the preassigned talk key.
There is a 45 second time-out to reply to the incoming caller. Once the 45 second time-out has elapsed and the PUSH-TO-
TALK button is no longer pressed, the panel returns to normal operation.
NOTE:
The 45-second time-out does not mean that after 45 seconds the user cannot continue talking with the incoming
caller if the PUSH-TO-TALK button is still pressed. It means that after 45 seconds, if either the incoming caller
or the WKP-1 disconnects normal talk key assignments are restored.
This means another user on the intercom system is calling. Press the PUSH-TO-
TALK button to answer the incoming call.
Keypanel Setup 23
Advertisement
Table of Contents
