Incoming Call Beep Menu; Channel Lock Menu - RTS BP-6000 Technical Manual

Universal Beltpack – BP-6000

Incoming Call Beep Menu

The Incoming Call Beep menu is used to enable and disable whether a beep is heard in the headset when
a call comes into the beltpack.
Available options are On or Off.
The default for this menu is Off.
To configure incoming call beep, do the following:
While in the program menu, navigate to Incoming Call Beep.
1.
[voice prompt] "Incoming Call Beep".
Press the TALK button to enable Incoming Call Beep.
2.
[voice prompt] "Off".
OR
Press the TALK button to disable Incoming Call Beep.
[voice prompt] "On".
Exit the Program Menu (see "Exit Program Menu" on page 19).
3.

Channel Lock Menu

The Channel Lock menu is used to program whether the BP-6000 has access to one or two channels.
When channel lock is used, the beltpack only operates on the locked channel. For example, if channel 1 is
locked, the beltpack only operates on channel 1.
Available options are Channel 1, Channel 2 or Off.
The default for this menu is Off.
To configure channel lock, do the following:
While in the program menu, navigate to Channel Lock.
1.
[voice prompt] "Channel Lock".
Press the TALK button to select Channel 1.
2.
[voice prompt] "Channel 1".
OR
Press the TALK button again to select Channel 2.
[voice prompt] "Channel 2".
OR
Press the TALK button again to select Off.
[voice prompt] "Off".
Exit the Program Menu (see "Exit Program Menu" on page 19).
3.
Initial Setup and Configuration 23