Omron E5EZ-PRR Series Manual page 17

Protect level
oapt
Operation /
0
adjustment protection
l.prt
Initial setting /
icpt
communications
1
protection
l.prt
wtpt
Setting change protection
off
l.prt
keyp
Automatic/ manual
off
key protection
l.prt
Communications setting level
u-no
Communications
1
Unit No.
l.com
bps
Baud rate
9 6
l.com
len
Data bits
7
l.com
sbit
Stop bits
2
l.com
Communication parity
l.com
■ Operation/ Adjustment Protection
The relationship between the set values and the range of protection is as shown below.
Set Values
Mode
0
❍ ❍
Present value
Set value
Others
Adjustment level
• When the set value is 0, there is no protective function.
• The initial value is 0.
■ Initial Setting/ Communications Protection
This protect level restricts movement to the initial setting, communications setting, and
advanced function setting levels
Set Value Initial setting level
Able to switch (able to switch to the advanced
0
functions setting level)
Able to switch (unable to switch to the advanced
1
functions setting level)
2 Able to switch
• Default setting: 1.
■ Setting Change Protection
Places restrictions on changes to settings with keys.
off : Able to use unit keys to change settings.
on: Unable to use unit keys to change settings, but this level can be changed.
■ Automatic/ Manual Key Protection
Set Value Automatic/ Manual Operations
off
Automatic/ Manual
on
Automatic/ Manual
• Initial value is " off ".
■ Setting Communications Parameters
'
Configures the E5EZ-PRR s communications specifications, so that its communications
with the host computer can be configured properly. In a layout where one point communi-
cates with multiple points, in addition to all of the communication unit numbers, all other
settings should match. Each unit must have a single communication unit number set for it.
Parameters Character
display
Communications
u-no
Unit No.
bps
Baud rate
len
Data bits
sbit
Stop bits
Communication
prty
parity
Digital Position-Proportional Controllers
1 2 3
❍ : Can be displayed
❍ ❍
×
❍
× ×
× × ×
.
Able to switch
Unable to switch
Set
(monitor) value
0 to 99
1. 2, 2. 4,
1.2, 2.4, 4.8,
4. 8, 9 . 6
9.6, 19.2
19. 2
7, 8
1, 2
none, even
None, even, odd
odd
: Can be displayed/ changed
: Cannot be displayed/
no changes in level allowed
Communications
Able to switch
Able to switch
Unable to switch
Setup Initial Unit
value
1 None
9.6 Kbps
7 Length
2 Bit
Even None
E5EZ-PRR
45