Omron E5EZ-PRR Series Manual page 10

■ Setting Level Configuration and Panel Key Operations
Parameters are split into groups, which are referred to as levels. Each of the set values (set items) in these levels are referred to as parameters.
E5EZ-PRR parameters are categorized into the following 7 levels:
Starting in manual mode
Press A key for at least 1 s.
c a-m
Press the
for at least 1 s;
display will flash.
Manual
Press the
See
for at least 3 s while
Mode
note 2. a-m is displayed.
Manual
Control Level
Note1:When returning from the initial setting lever to the operation level, the
operation level's initial value will be displayed.
2:When returning from the protect level to the operation level, the
operation level's initial value will be displayed.
Protect level
Operation level
Adjustment level
Manual control level
Initial setting level
∗
Advanced function setting level
Communications setting level
∗ : Set the initial/ communications protection parameter in protect level to 0, in order to activate the advanced function setting level.
❍: Indicates items that can be set. In these cases, the initial setting level, communications setting level, and advanced function setting level
can only be used when controls are stopped. Please take note of the fact that when any one of these three levels is selected, the controller's
output will be stopped.
With the exception of operation level, the present level will be on display. No. 3 Display will show the following when switching between set
:
values
Third Display
Manual MV
l.prt
No display
l. adj
l.ini
l.com
l. adv
38
Digital Position-Proportional Controllers
Power ON
Starting in automatic mode
Operation Level
L
Press
for at least 1 s.
Press the
L
key
L
key for
at least 1 s.
L
key
See note 1.
Initial Setting Level
L
Press key
for at least 1 s.
Advanced Function
Setting Level
Control operating
❍
❍
❍
❍
−
−
Level's Name
Manual control level
Protect level
Operation level
Adjustment level
Initial setting level
Communications setting level
Advanced function setting level
Adjustment Level
Press the
key
L + M
keys
L
Press the key for at least 1 s.
for at least 1 s;
c
25
display will flash.
100
L
Press the key for
100.0
at least 3 s.
Control stops.
Communications
Setting Level
L
Press key
for at least 1 s.
Input password.
Set value −169
∗ The amount of time that a key must
be pressed can be changed under
protect level switching time
(advanced function setting level).
Control stops
E5EZ-PRR
L M
key:
+
PV display flashes
c
25
100
100.0
∗
M
L
+ key
for at least 3 s
See note 2.
Protect Level
Control in progress
Control stopped
Not displayed for some models
Level change
−
−
−
−
❍
❍
❍