Installation, Connecting Up, Commissioning, Operation; Important Notes On Using The Device; Notes On Use In Hazardous Areas - Siemens SIMATIC NET S7-1500 Operating Instructions Manual

Industrial ethernet
Hide thumbs Also See for SIMATIC NET S7-1500:
Table of Contents

Advertisement

Installation, connecting up, commissioning, operation

3.1

Important notes on using the device

Safety notices on the use of the device
Note the following safety notices when setting up and operating the device and during all
associated work such as installation, connecting up or replacing the device.
NOTICE
LAN attachment
A LAN or LAN segment with the attachments belonging to it should be within a single low-
voltage supply system and within a single building.
Ensure that the LAN is in an of type A environment according to IEEE 802.3 or in a type 0
environment according to IEC TR 62101.
Never establish a direct electrical connection to TNV networks (telephone network) or
WANs (Wide Area Network).
3.1.1

Notes on use in hazardous areas

The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).
EXPLOSION HAZARD
Do not connect or disconnect cables to or from the device when a flammable or
combustible atmosphere is present.
EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.
CP 1543-1
Operating Instructions, 12/2019, C79000-G8976-C289-08
WARNING
WARNING
WARNING
3
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net cp 1543-1

Table of Contents