Advertisement
›
Interlock switch
The interlock wiring is along
in the frame.
➀ Attach the wiring covers B and C.
œ
Rubber cap
➀ Attach the wiring covers A to the front cover.
➁ Attach the cable retainer.
➂ Attach the rubber cap.
Wiring cover C
Screws
silver, M4 x 8 mm
Cable retainer
Screws
silver, M4 x 8 mm
Screws, with washer
M4 x 6 mm
Wiring cover B
Note: When installing the wiring covers B and C and
the switch box, be especially careful to keep the inter-
lock wiring from being pinched.
Wiring covers A
Front cover
Note: Using a cutter, make a cross-shaped cut in the
center of the rubber cap for the front cover as required.
This cut is used when you want to pass the sensor cable
or the like through.
7
Advertisement
