Advertisement
Assembly
–
Switch box
—
Bottom stay A
˜
Left side frame
Right side frame
Screws: silver, M4 x 8 mm
➀ Attach the left side frame.
➁ Attach the right side frame.
➂ Attach the top frame A.
➃ Attach the back frames A and B.
Bottom stay B
Top flame A
Back flame A
➀ Place the modeling machine at the installation loca-
tion.
➁ Remove the switch box from the modeling machine (4
screws). Pull out the wiring from the switch box.
Note: Place the removed switch box on the modeling
machine's table or base cover.
➀ Line up bottom stays A and B with the modeling
machine's rubber feet and perform positioning of the
safety cover.
Note: After the safety cover has been installed, the mod-
eling machine cannot be relocated. Be sure to perform
emplacement of the modeling machine before attach-
ing the safety cover.
Back flame B
Back flame
Side frame
Top flame A
Side frame
5
Advertisement
