Indicator Links; Parameters Bar - Hughes JUPITER System HT2000 User Manual

Indicator links

Parameters bar

Chapter 2 ● System Control Center
14
1040967-0001 Revision A
At the top of each System Control Center page are two indicators followed by a text
link (Figure 7), as well as a language selection drop-down.
Each text link navigates to a page in the System Control Center.
the destination page for each link.
Indicator
System Status System Status page
System Information System Information page
The System Status indicator also changes color to indicate the operational status of
the satellite modem.
 Red: The system has a problem.
 Yellow: The system is operational, but under a degraded condition.
 Green: The system is functioning within normal parameters.
The parameters bar appears at the top of all System Control Center screens as
shown in Figure 8. This bar displays three important fields of information:
 SAN – Site account number (SAN), which identifies the installation site.
 ESN – Electronic serial number assigned to the modem.
 Diagnostic Code – Used to troubleshoot problems.
Figure 8: Parameters bar
Figure 7: Indicators and links
Table 1: Destination pages
Destination
Gives important information about
the satellite modem's operational
status.
General information screen that
identifies software and hardware
versions and other important
satellite connection information.
Table 1 describes
Description