Appendix B Standards Compliance; Repairs In Canada; Electromagnetic Interference (Emi) - Hughes JUPITER System HT2000 User Manual

Repairs in Canada

Electromagnetic interference (EMI)

Standards compliance
The HT2000 satellite modem has been certified to comply with the standards listed
in Table 4. Additional information follows the table.
Table 4: HT2000 standards compliance
Category
Safety
Electromagnetic Interference (EMI)
Electromagnetic Compatibility (EMC)
RF Spectrum
Telecommunications
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by
the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Users should not attempt to make electrical ground connections themselves, but
should contact the appropriate electrical inspection authority, or electrician, as
appropriate.
This product conforms to EMI standards of the U.S. FCC, and Canadian CSA, as
detailed in the following sections. The installation and maintenance procedures in
the installation guide must be followed to ensure compliance with these
regulations.
Appendix B
Standard
UL60950-1 for the USA
CAN/CSA-C22.2 No. 60950-1 for Canada
IEC60950-1 for International (CB Scheme
Certification)
EN60950-1 for the EU
FCC Part 15 for the USA
ICES-003 for Canada
EN301-489-1 and EN 301-489-12 for the EU
EN301-459, EN301-360, EN301-428 for
the EU
FCC Part 25 for the USA
TIA IPoS
Appendix B ● Standards compliance
1040967-0001 Revision A
23