Crossfade Amount; Cross-Switch Point; Primary Filter Type - E-Mu Planet Phatt Operation Manual

• Crossfade Amount

The crossfade amount parameter determines the range over which
crossfading will occur. Crossfade amount is variable from 000 to 255.
The larger the value, the more modulation will be required to effect a
complete crossfade.

• Cross-switch Point

The cross-switch point determines the point at which cross-switching
will occur when key position or velocity is controlling cross-switch.
Velocity

• Primary Filter Type

This function selects the type of filter for the primary layer. 17 differ-
ent filter types are provided. If no filtering is desired, you can bypass
the filter by turning it Off.
FILTER TYPES
2-pole Lowpass
Lowpass filter with 12dB/octave rolloff and Q control.
4-pole Lowpass
Lowpass filter with 24dB/octave rolloff and Q control.
6-pole Lowpass
Lowpass filter with 36dB/octave rolloff and Q control.
2nd Order Highpass
Highpass filter with 12dB/octave rolloff and Q control.
4th Order Highpass
Highpass filter with 24dB/octave rolloff and Q control.
XFADE AMOUNT
128
SWITCH POINT
064 (E3)
FILTER TYPE pri
2 Pole Lowpass
Key
Chapter 5: Edit Menu
EDIT MENU
To enable the cross-switch
function, you must assign
Crossfade to a modulation
source in the Realtime or
Key/Velocity Modulation
screen.
67