Crossfade Mode - E-Mu Planet Phatt Operation Manual

• Crossfade Mode

This function determines which of the following crossfade modes will
be selected: Off, Crossfade, or Cross-Switch.
Off
When "Off" is selected, none of the crossfade parameters will
have any effect.
Crossfade
When "Xfade" is selected, a control input is used to fade between
the primary and secondary. Any modulation source may be used
as an input (velocity, wheel, etc.).
Cross-switch
When "Xswitch" is selected, the switched layer is selected if the
input crosses a certain threshold or if a footswitch controlling
cross-switch is activated. The switch occurs only at the start of the
note; no further switching takes place while the key is held down.
If key position or velocity is routed to cross-switch, the threshold
is the switch point. Realtime controllers do not have any effect
when routed to cross-switch. For more information, see Cross-
Switch Point on page 67.
Primary
Instrument
Key Range
By overlapping the primary and secondary instruments, you can crossfade or cross-
switch between the layers.
XFADE MODE
Off
Crossfade Range
Secondary
Instrument
Key Range
Chapter 5: Edit Menu
EDIT MENU
••• To use the keyboard for
crossfade, set the Crossfade
Balance to 64 and the Key
Center to the split point.
65