Mix Output; Midi Mode - E-Mu Planet Phatt Operation Manual

MASTER MENU
••• This function is useful
when sequencing because it
allows you route specific
MIDI channels to the Submix
outputs. From there they can
be externally processed with
reverb or other effects.
Warning: To transfer
presets between two Planet
Phatt units, the ID numbers
of both units must match.

• Mix Output

This function allows you to override the output assignments made in
each preset and instead assign the outputs according to MIDI channel.
This also allows you to change the output assignment of the factory
presets. For each of the 16 MIDI channels, you can select the Main,
Sub 1, or Sub 2 outputs, or "P". When "P" is selected, the output
assignment selected in the preset is used. If no plugs are inserted into
the sub outputs, the audio will be automatically directed to the main
outputs.

• MIDI Mode

This function selects one of the four MIDI modes and the MIDI system
exclusive ID number.
Omni mode
Planet Phatt responds to note information on all MIDI channels
and plays the preset currently displayed in the main screen.
Poly mode
Planet Phatt only responds to note information received on the
currently selected MIDI channel (on the preset selection screen)
and plays that channel's associated preset.
Multi mode
Planet Phatt responds to data on any combination of MIDI chan-
nels and plays the specific preset associated with each of the MIDI
channels.
Mono mode
Planet Phatt responds to data on any combination of MIDI chan-
nels but plays each channel monophonically. If a new note on a
channel is played before the last note is released, the envelopes
will not be retriggered (legato).
ID number
This function allows a computer patch editor to distinguish
between multiple Planet Phatt units. In the case of multiple
Planet Phatt units, each unit should have a different ID number.
24 Planet Phatt Operation Manual
MIX OUTPUT
channel 01:P
MIDI MODE ID
Omni 00