Connection Instructions - E-Mu Planet Phatt Operation Manual

M I D I C o n t r o l l e r
(MIDI Keyboard, Sequencer, etc.)
C o n t r o l
P e d a l
E-MU SYSTEMS, INC.
Scotts Valley, California U.S.A.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
100-250VAC 50/60 Hz ~ THIS PRODUCT TO RAIN OR MOISTURE.
M a l e R C A p l u g
t o
M a l e P h o n o P l u g
A u x . o r
T a p e I n
H o m e S t e r e o
S y s t e m
MIDI In
Planet Phatt is controlled by MIDI messages received at the MIDI
In connector. Connect the MIDI In of the Planet Phatt to the
MIDI Out connector of a MIDI controller such as a MIDI keyboard
or MIDI drum pads.
Outputs
Planet Phatt is a high quality, stereo audio device. In order to
reproduce its wide dynamic range and frequency response, use a
high quality amplification and speaker system such as a keyboard
amplifier or home stereo system. A stereo setup is highly desirable
because of the added realism of stereophonic sound. Headphones
can be used if an amplifier and speaker system is not available.
Plug stereo headphones into the headphone jack located on the
left side of the front panel. The Right Main output jack serves as a
mono output when the Left Main plug is not plugged in.
SETUP #1 BASIC SETUP
MIDI Out
MIDI
IN OUT THRU
T o
M a i n O u t s
Chapter 1: Basic Setup

CONNECTION INSTRUCTIONS

T h e H e a d p h o n e
O u t p u t i s l o c a t e d
o n t h e F r o n t P a n e l
OUTPUTS
R - SUB2 - L R - SUB1 - L R - MAIN - L
MONO STEREO
M i x e r
A m p
S p e a k e r s
H o m e S t u d i o
S y s t e m
The headphone output
monitors the main outputs
only.
The submix outputs do NOT
feed into the headphone
output.
• • • If Planet Phatt does not
seem to be responding
correctly, make sure that
both Planet Phatt and your
MIDI controller are set to the
same MIDI channel.
5