Pitch Wheel -> Scratch; Midi Footswitch Assign - E-Mu Planet Phatt Operation Manual

• Pitch Wheel -> Scratch
This function allows the pitch wheel to simulate record scratching.
When this function is On, the speed that you move the pitch wheel
back and forth determines the pitch of the keys being played. There-
fore the faster you move the wheel back and forth, the faster the
sound plays through. The amount of control the wheel has is adjust-
able from 1 to 100. Adjust the amount depending on the type of
sound being scratched and to suit your personal preference. Scratch
can be assigned to any MIDI channel from 1-16 or to "All" channels.
Setting the channel to "None" turns scratch mode off.

• MIDI Footswitch Assign

Like the MIDI Controllers, 3 MIDI footswitches can be assigned to
MIDI footswitch numbers. Footswitches can be assigned numbers from
64-79. Destinations for the footswitch controllers are programmed in
the Edit menu.
PITCH WH->SCRATCH
ch:01 amt:50
FOOTSWITCH #
1:64 2:65 3:66
Chapter 3: Master Menu
MASTER MENU
••• A few of the standard-
ized MIDI switch numbers
are listed below.
64 - Sustain Switch (on/off)
65 - Portamento (on/off)
66 - Sostenuto (on/off)
67 - Soft Pedal (on/off)
69 - Hold Pedal 2 (on/off)
29