Send Midi Data - E-Mu Planet Phatt Operation Manual

MASTER MENU
••• The Preset, Volume, and
Pan information for all 16
channels is included when
the Master settings are
transmitted or received.
Warning: When transfer-
ring SysEx data from one
Planet Phatt to another, the
ID numbers of both units
must match.

• Send MIDI Data

This function will send MIDI System Exclusive data to the MIDI Out
port of Planet Phatt. The MIDI data can either be sent to a computer/
sequencer or to another Planet Phatt. Using the cursor key and the
data entry control, select the type of MIDI data you wish to transmit.
User Beat Data
Transmits all User Beat data (tempos, X factor, preset) and all user
Song Beat data (events, repeats, jumps).
Master Settings
Transmits all parameters in the Master menu except tuning table,
program/preset map and viewing angle.
Program/ Preset Map
Transmits only the program/preset map.
Tuning Table
Transmits only the user tuning table.
Factory Presets
Transmits all the factory ROM presets.
User Presets
Transmits all the user presets.
Any Individual Preset
Transmits only the selected preset.
The Enter LED will be flashing. Press the Enter button to confirm the
operation. To receive MIDI data, simply send the MIDI data into
Planet Phatt from another Planet Phatt or your sequencer.
To Record MIDI Data into a Sequencer:
1. Setup sequencer to receive system exclusive data.
2. Place sequencer into record mode, then Send Preset Data.
To Receive MIDI Data from a Sequencer:
1. Simply play back the sequence into Planet Phatt.
Warning:
Send data as you would a regular sequence. Sending data
in one huge chunk may clog Planet Phatt's MIDI input buffer.
30 Planet Phatt Operation Manual
SEND MIDI DATA
000 sbs:1st Bass