Using Planet Phatt With A Sequencer - E-Mu Planet Phatt Operation Manual

STEP-BY-STEP

USING PLANET PHATT WITH A SEQUENCER

We thought you'd never ask. Planet Phatt was designed from its con-
ception with multi-timbral sequencing in mind. Just take a look at the
main screen.
The preset for each MIDI channel is selected from the main screen.
Press the cursor button to move the cursor up so that it is underneath
the channel number.
Turn the data entry control and you will see that every MIDI channel
has a preset assigned to it. Just select a preset for each of the MIDI
channels. It's simple! In order to respond to multiple MIDI channels,
Planet Phatt must be in Multi-Mode. Multi-Mode is selected in the
Master menu. Press the Master menu button and use the data entry
control to scroll through the screens until you find MIDI MODE.
Move the cursor down to the second line and change the mode to
Multi as shown. Planet Phatt will now respond to multiple MIDI
channels.
MORE ADVANCED SEQUENCING
• Pre-Sequence Setup
Suppose that you want to have your sequencer set up everything for
you before the start of the song. Good idea. This will make the setup
procedure automatic and prevent the wrong presets from playing.
The basic idea of a pre-sequence setup is to send out MIDI information
just before the start of the song. This MIDI information will select all
the proper presets, adjust the mix, and pan positions of each preset.
92 Planet Phatt Operation Manual
C01 Vol127 Pan=P
000 Preset Name
C01 Vol127 Pan=P
000 Preset Name
MIDI MODE ID
Multi 00