Mitsubishi Electric Melsec QJ71LP21 Reference Manual page 245

7 APPLICATION FUNCTIONS
7 - 21
(2) Routing parameter settings
(a) Setting screen
On the following screen, up to 64 "Target network No." can be set for the
High Performance model QCPU, Process CPU, Redundant CPU, and
Universal model QCPU, or up to eight for the Basic model QCPU and
safety CPU.
Note that the same target network No. cannot be specified more than once.
Therefore, the host can become the request source or can be relayed
through when accessing other stations on up to 64 or 8 networks with
different "Target network No."
Setting item
Transfer network No.
Relay network No.
(Relay destination network No.)
Relay station No.
(Relay destination station No.)
[Screen display]
Click
(b) Setting method
Set the routing parameters according to the procedure described below.
Request
source
Network No.
To access "network No. ," it is necessary to route through station No.
Target
network No.
1
2
Valid setting range
1 to 239
1 to 239
1 to 64
Relay station
Network No.
Request
destination
of network No.
Relay Relay
network No. station No.
MELSEC-Q
.
7 - 21