Mitsubishi Electric Melsec QJ71LP21 Reference Manual page 173

5 PARAMETER SETTINGS
5 - 22
(b) Setting items
1) Parameter name
Set the parameter name to make it easy to understand for which
system each parameter is used.
• Number of input characters: Up to eight alphabetic characters
2) Switch screens
The windows can be switched using the selection dialogue box (LB
settings, LW settings).
3) Setting 1 and setting 2
• The send ranges of all station numbers can be divided into two:
Setting 1 and Setting 2.
• Any values can be set as long as they are within the network
assignment range (including all stations) of the common parameters.
• Note that even if the ranges are set with the common parameters,
the assigned ranges become invalid for the station numbers for
which nothing is set with Setting 1 and Setting 2 of the station
inherent parameters.
4) Reference network range assignment (Normal station only)
This is used when station inherent parameters are set with the control
station's network range assignments being viewed.
With the Reference button, select the project of the control station.
In the Project Name box, select the position of the control station.
A click on the Read button displays the control station's network range
assignments in the Network range assignment area.
MELSEC-Q
5 - 22