Front Ventilated Seats - If Equipped; Head Restraints - Dodge Charger SRT 392 2017 Operating Information Manual

• Push the heated seat button
time to select LO-level heating.
• Push the heated seat button
turn the heating elements off.
NOTE:
• Once a heat setting is selected, heat will
be felt within two to five minutes.
• The engine must be running for the heated
seats to operate.
If the HI-level setting is selected, the system will
automatically switch to LO-level after approxi-
mately 60 minutes of continuous operation. At
that time, the number of illuminated LEDs
changes from two to one, indicating the change.
The LO-level setting will turn off automatically
after approximately 45 minutes.
Front Ventilated Seats — If Equipped
Located in the seat cushion and seat back are
fans that draw the air from the passenger com-
partment and move air through fine perforations
in the seat cover to help keep the driver and
front passenger cooler in higher ambient tem-
peratures. The fans operate at two speeds: HI
and LO.
The front ventilated seats control buttons are
located within the Uconnect system. You can
gain access to the control buttons through the
climate screen or the controls screen.
• Press the ventilated seat button
choose HI.
• Press the ventilated seat button
a second
time to choose LO.
• Press the ventilated seat button
a third time to
time to turn the ventilated seat off.
NOTE:
The engine must be running for the ventilated
seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start,
the driver's ventilated seat can be programmed
to come on during a remote start.
This feature can be programmed through the
Uconnect system. Refer to "Uconnect Settings"
in "Understanding Your Instrument Panel" for
further information.

Head Restraints

Head restraints are designed to reduce the risk
of injury by restricting head movement in the
event of a rear impact. Head restraints should
be adjusted so that the top of the head restraint
is located above the top of your ear.
WARNING!
• All occupants, including the driver, should
not operate a vehicle or sit in a vehicle's seat
until the head restraints are placed in their
proper positions in order to minimize the risk
of neck injury in the event of a crash.
once to
a second
WARNING! (Continued)
• Head restraints should never be adjusted
a third
while the vehicle is in motion. Driving a
vehicle with the head restraints improperly
adjusted or removed could cause serious
injury or death in the event of a collision.
NOTE:
Do not reverse the head restraints (making the
rear of the head restraint face forward) in an
attempt to gain additional clearance to the back
of your head.
Reactive Head Restraints — Front Seats
The front driver and passenger seats are
equipped with Reactive Head Restraints (RHR).
In the event of a rear impact, the RHRs will
automatically extend forward minimizing the gap
between the back of the occupants head and
the RHR.
The RHRs will automatically return to their nor-
mal position following a rear impact. If the RHRs
do not return to their normal position, see your
authorized dealer immediately.
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint, push
the adjustment button located at the base of the
head restraint and push downward on the head
restraint.
(Continued)
63