Checklist; Machine; Delivery And Transport - AgfaPhoto d-lab.2plus Series Service Manual

Digital minilabs
Table of Contents

Advertisement

d-lab.2, d-lab.2plus, netlab.2plus: Preinstallation
6

Checklist

The completed checklist must be returned to the AgfaPhoto Service in charge no later
than two weeks prior to the scheduled installation date. Only if all conditions listed
below have been satisfied and this has been confirmed by the customer writing, the
installation can be made at the scheduled date.
If individual points or all of the conditions below have been neglected this causes a delay
and/or additional expenditure for the Service, which can be charged to the customer.
6.1

Machine

The following machine should be delivered and installed:
d-lab.2
d-lab.2plus
netlab.2plus
6.2

Delivery and Transport

Yes
No
Delivery
The customer ensures free access for the delivery day
Can the delivery truck drive up to the entrance?
Transport
Access to the operation site on ground floor?
If NOT, describe the delivery and transport situation:
Machine must transported upstairs / downstairs:
Number of floors / stairs _____ / _____
Freight elevator present?
Loading zone present?
Fork lift / crane required?
Doors must be removed?
Windows must be removed?
Transport across uneven floor, thresholds, etc.?
Inspection by forwarder required prior to the installation?
Remarks: __________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Access to the operation site: Height and width of hallways and doors meet the minimum
requirements? (door width min. 0.95 m, height 1.85 m)
AgfaPhoto
2005-05-01 / PN 04100_01
Checklist
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-lab.2 seriesNetlab.2plus series

Table of Contents